HD FIRE PROTECT

• Flow Switch
• Size: 2" to 8"
• Vane type water flow switch for use in wet sprinkler systems
• Approvals: UL Listed & FM Approved
• High/Low Pressure Switch
• Designed to detect pressure increase of decrease in fire protection systems
• Explosion-proof model available
• Approvals: UL Listed & FM Approved

• Easy maneuverability
• Trolley with two solid rubber wheels
• 63 or 75 (2.5" or 3") monitors can be mounted
• Water supply manifold with 2 or 4 inlet connections of 2.5" BSP
instantaneous coupling
• Epoxy painted

• Rugged 2 wheeled trailer with various capacities of storage tank
• Easy maneuvered by two persons or pulled behind light truck or jeep
• 80 or I 00 mm (3" or 4") monitor mounted on tank
• Over run and manual brake
• Low profile design for safety and stability
• Four stabilizer leg for added safety
• Trailer equipped with reflector
• Provision of manifold having 2.5" or 4" BSP coupling at rear side of trailer for water supply to monitor from hydrant network
• Epoxy painted

• Factory set for single fixed flow between 4750 to
8500 lpm ( 1250 to 2245 gpm) at I 00 psi
(7.0 kg/sq.cm)
• Jet ratio controlled provider for higher flow rate
• I SO mm (6 ") flanged inlet

• Factory set for single fixed flow between 3030 to
47501pm (800 to 1250 gpm) at I 00 psi
(7.0 kg/sq.cm)
• 4" BSP swivel female inlet

• Factory set for single fixed flow between 1900 to
2850 lpm (500 to 700 gpm) at I 00 psi
(7.0 kg/sq.cm)
• 3" BSP swivel female inlet

• Factory set for single fixed flow between I 500 to
2650 LPM (400 to 700 gpm) at I 00 psi
(7.0 kg/sq.cm)
• 2.5" BSP swivel female inlet

• Factory set for fixed
flow 5680 to 2500 pm
(1500 to 3300 gpm)at 100 psi (7.0 kg/sq.cm)
•FM approved for flow up to 2200 gpm

• Factory set for fixed
flow3030 to 7575 lpm
(800 to 2000 gpm)at I 00 psi (7.0 kg/sq.cm)
•4" BSP swivel female inlet base
•FM approved

• Factory set for fixed flow
I 500 to 3030 pm
(400 to 800 gpm)at I 00 psi (7.0 kg/sq.cm)
•3" BSP swivel female inlet base
•FM approved

• Factory set for fix flow
I 500 to 2850 lpm
(400to 750 gpm) at
I 00 psi (7.0 kg/sq.cm)
• 2.5" BSP swivel female
inlet base

• Cast Bronze Construction
• 360° continuous horizontal rotation
and +90° & -45° vertical elevation
or optional +85° & -0°/-15°/-30°
vertical elevation
• Liquid filled pressure gauge
• Double Row of SS ball bearing
& grease fittings
• Max operating pressure 12 kg/cm.sq
(175 psi)
• Flow up to I 000 gpm (3800 lpm)
• Vertical and horizontal movement
by handle and manual lock

• Cast Bronze Construction
• Fully enclosed gear
• Liquid filled pressure gauge
• Double row of Stainless Steel ball bearing with grease fittings
• Maximum operating pressure
12 kg/cm.sq ( 175 psi)
• I 15 mm waterway with I 00 or
150 mm (4" or 6") flanged inlet
and 4" BSP male threaded outlet
• 360° continuous horizontal rotation,
+90°, -45° vertical elevation
• Red finish
• FM approved with VARSHA 50
nozzle for flow up 2000 gpm
(7560 lpm)

• Size: I 00 or 150 mm (4" or 6") flanged inlet with 4" BSP male threaded outlet
• Low profile design
• Stainless Steel waterway
• Fully enclosed worm gear for horizontal and vertical movement
• 360° continuous horizontal rotation and +90°, -65° vertical elevation
• Maximum operating pressure 12 kg/cm.sq ( 175 psi)
• Liquid filled pressure gauge
• Variable flow with nozzle model H4V (500/750/1 OOOgpm)
• Fixed flow with nozzle model H4 (500/750/1 OOOgpm)
• Red finish
• Approvals: UL Listed

• Size: 80, I 00 mm or 150 mm (3", 4" or 6") flanged inlet with 3" BSP male threaded outlet
• Low profile design
• Stainless steel 3" waterway
• Bronze swivel joint with double row of stainless steel ball bearing with grease fittings
• Fully enclosed worm gear for horizontal and vertical movement
• 360° continuous horizontal rotation and +90°, -65° vertical elevation
• Maximum operating pressure 12 kg/cm.sq ( 175 psi)
• Liquid filled pressure gauge
• Flow up to 3030 lpm (800 gpm) friction loss less than IO psi

• Size: 80 mm (3") with 80. I 00 or 150 mm (3", 4" or 6") flanged inlet and 3" BSP male outlet
• Stainless steel waterway. Bronze swivel joint
• Double row of stainless steel ball bearing with grease fittings
• Liquid filled pressure gauge (optional)
• Fully enclosed worm gear for horizontal or vertical movement
• 360° continuous horizontal rotation and +90°, -45° vertical elevation
• Maximum operating pressure 12 kg/cm.sq ( 175 psi)
• Flow up to 3030 lpm (800 gpm) friction loss less than IO psi
• Red finish

• Size: 80 mm (3") waterway with flanged inlet of 80, I 00 or 150 mm
(3", 4" or 6") & outlet threaded to 3" BSP male
• Stainless steel construction
• Vertical and horizontal movement by handle and manual lock
• Easy deployment by one person
• Bronze swivel joint with double row of stainless steel ball bearing with grease fittings
• Maximum operating pressure 12 kg/cm.sq ( 175 psi)
• 360° continuous horizontal rotation & +90°, -45° vertical elevation
• FM approved with VARSHA 40 master steam nozzle having flow of 1500,
1900, 2270, 2650 & 3030 lpm (400, 500, 600, 700, 800 gpm)

• Size: 65 mm (2.5") waterway. Inlet flanged 65. 80 or I 00 mm (2.5", 3" or 4")
and outlet threaded to 2.5" BSP male
• Stainless steel waterway
• Vertical and horizontal movement by handle and manual lock
• Bronze or Stainless steel swivel joint with double row of stainless steel ball bearing and grease fittings
• 360° continuous horizontal rotation and +90°, -45° vertical elevation
• Maximum operating pressure 12 kg/cm.sq ( 175 psi).
• Flow up to 2270 lpm (600 gpm) friction loss less than IO psi

• Size: 150 mm (6") flanged inlet and outlet
• Low profile design- Hot dip galvanized Carbon steel waterway
• Bronze swivel joint with double row of stainless steel ball bearing
• Fully enclosed worm gear
• Maximum service pressure 12 kg/cm.sq ( 175 psi)
• 360° continuous horizontal rotation and +90°, -65° vertical elevation
• Liquid filled pressure gauge (optional)
• Single lifting hook
• Flow up to 12500 lpm (3300 gpm)
• FM approved with VARSHA 60 master stream Nozzle with now up to 2200 gpm
• Red finish

• Size: I 00 mm (4") waterway
• Low profile design
• Hot dip galvanized carbon steel waterway
• I 00 or 150 mm (4" or 6") flanged inlet with 4" BSP male threaded outlet
• Bronze swivel joint with double row of stainless steel ball bearing with grease fittings
• Fully enclosed worm gear for horizontal and vertical movement of monitor
• 360° continuous horizontal rotation & +90°, -65° vertical elevation
• Maximum operating pressure 12 kg/cm.sq ( 175 psi)
• Liquid filled pressure gauge (optional)
• Flow up to 4750 lpm ( 1250 gpm) friction loss less than IO psi
• Red finish

• Size: 80, I 00 or 150 mm (3", 4" or 6") flanged inlet with 3" BSP male threaded outlet
• Low profile design
• Hot dip galvanized carbon steel 3" waterway
• Bronze swivel joint with double row of stainless steel ball bearing with grease fittings
• Fully enclosed worm gear for horizontal and vertical movement of monitor
• 360° continuous horizontal rotation and +90°, -65° vertical elevation
• Maximum operating pressure to 12 kg/cm.sq ( 175 psi)
• Liquid filled pressure gauge (optional)
• Flow up to 3030 lpm (800 gpm) friction loss less than IO psi
• Red finish

• Size: I 00 mm (4") with I 00 or I 50 mm (4" or 6") flanged inlet and 4" BSP male outlet
• Hot dip galvanized Carbon steel 4" waterway and Bronze swivel joint
• Double row of Stainless Steel ball bearing with grease fittings
• Liquid filled pressure gauge (optional)
• Fully enclosed worm gear for horizontal and vertical movement
• 360° continuous horizontal rotation and +90°, -45° vertical elevation
• Maximum operating pressure 12 kg/cm.sq ( 175 psi)
• Flow up to 4750 lpm ( 1250 gpm) friction loss less than IO psi
• FM approved with VARSHA 50 master stream nozzle and solid bore nozzle NW I 000
• Red finish

• Size: 80, I 00 or 150 mm (3", 4" or 6") flanged inlet with 3" BSP male threaded outlet
• Hot dip galvanized carbon steel waterway and bronze swivel joint
• Double row of stainless steel ball bearing with grease fittings
• Liquid filled pressure gauge (optional)
• Fully enclosed worm gear for horizontal and vertical movement
• 360° continuous horizontal rotation and +90°, -45° vertical elevation
• Maximum operating pressure 12 kg/cm.sq ( 175 psi)
• Flow up to 3030 lpm (800 gpm) friction loss less than IO psi
• Red finish

CONCEALED SPRINKLER
• Standard and quick response
• Temperature rating:
• 57°C & 68°C for Sprinkler bulb & 57°C for Cover Plate
• 79°C & 93°C for Sprinkler bulb & 68°C ( I 55°F) for Cover Plate
• K-factor 5.6
• Brass Sprinkler with White or Chrome finish Cover Plate

• Standard and quick response with standard coverage
• Pendent or Upright mounting
• Temperature rating: 57°, 68°, 79°& 93°C
• K-factor 5.6 and 4.2
• Brass. Chrome or White/Custom colour finish

•Standard and quick response with standard & extended coverage
• Horizontal Sidewall mounting
• Temperature rating: 57°, 68°, 79° & 93°C
• K-factor 5.6
• Brass, Chrome or White/Custom colour finish

• Flexible Sprinkler Connections
• Complete unit, a corrugated stainless steel flexible with nipple, reducer, bar and brackets
• Sizes: 700mm, I OOOmm, I 200mm, I SOOmm, I 800mm
• Max Service Pressure - 12 kg/cm.sq

• Sprinkler guard comes in hard-wired cage design, chrome plated
• Used for encasing the sprinkler and protecting it from any inadvertent damages
• Suitable for pendent and upright mounted sprinklers

• Standard and quick response with standard & extended coverage
• Vertical Sidewall mounting
• Temperature rating: 57°, 68°, 79° & 93°C
• K-factor 5.6 and 4.2
• Brass, Chrome or White/Custom colour finish

• Size: 65 mm (2.5") with 1750 lpm at 7 kg/cm.sq
• Size: 80 mm (3") with 2580 lpm at 7 kg/cm.sq
• Size: I 00 mm (4") with 3500 lpm at 7 kg/cm.sq
• Hot dip galvanized carbon steel waterway
• Maximum service pressure 12 kg/cm.sq ( 175 psi)
• Monitor with fixed flow solid bore nozzle
• Bronze swivel joint with double row of stainless steel ball bearing
• Vertical & horizontal movement by handle and manual lock
• 360° continuous horizontal rotation & +90°, -45° vertical elevation
• ISi Marked
• Red finish

• Size: 80 mm (3") waterway with flanged inlet of 80. I 00 or 150 mm
(3", 4" or 6") & outlet threaded to 3" BSP male
• Hot-dip galvanized carbon steel waterway
• Vertical and horizontal movement by handle and manual lock
• Easy deployment by one person
• Bronze swivel joint with double row of stainless steel ball bearing with grease fittings
• Maximum operating pressure 12 kg/cm.sq ( 175 psi)
• 360° continuous horizontal rotation & +90°, -45° vertical elevation
• FM approved with VARSHA 40 master steam nozzle having flow of
1500, 1900, 2270, 2650 & 3030 lpm (400, 500, 600, 700, 800 gpm)

• Model FMA & FMA-S
• Size: 50 & 65 NB (2" & 2.5")
• Flow 75 to 550 LPM
• Carbon Steel or Stainless Steel construction
• Working pressure 2.8 to 7 kg/cm.sq
(40 to I 00 psi)
• Epoxy painted from inside and outside
• Supplied with Stainless Steel orifice

• Size: 65 mm (2.5")
• Hot dip galvanized carbon steel waterway and Bronze swivel joint
• Double row of stainless steel ball bearing with grease fittings
• Fully enclosed worm gear for vertical movement and handle with twist lock for horizontal rotation
• 360° continuous horizontal rotation and +90°, 45° vertical elevation
• Maximum operating pressure to 12 kg/cm.sq ( 175 psi)
• Flow up to 2270 lpm (600 gpm) friction loss less than IO psi
• Red finish

MOBILE FOAM UNIT
• 160 liters capacity in Fiber Glass Foam Tank
• I 20 to 220 liters capacity in Stainless Steel Foam Tank
• Two solid rubber wheels for easy maneuver by one person
• Mounted with bronze or stainless steel foam inductor and aluminum low expansion foam branch pipe
• Flow rate of 225/450 lpm (60/ 120 gpm) at 7 kg/cm2
• Provision of mounting two fire hoses
• Fire hoses and Foam concentrate supply (optional)

Descriptions
• Size: 1(2" & 3/4" BSPT or NPT
• Model: TC - Brass construction
• Model: TCS - Stainless Steel construction
• Non-automatic open orifice, fix pattern
• Used for Tank cooling applications

Descriptions
• Size: I (2" & 3/4" BSPT or NPT
• Model: WC - Brass construction
• Model: WCS - Stainless Steel construction
• Non-automatic open orifice,
fix pattern used as curtain nozzle or as window nozzle

• Size: I (2 BSPT or NPT
• Model: MV-C (without Strainer) & MV-CS (with Strainer)
• Open orifice used in deluge water spray system
• Non-automatic fixed pattern external deflector
• Solid cone discharge in the opposite direction of water inlet
• Combination of different orifices & spray angle
• K-factor (Metric): 22, 30, 35, 41, 5 I, 64, 91 & I 02
• K-factor (US): 1.54, 2.10, 2.45, 2.87, 3.57, 4.48, 5.53,
6.63 & 7.14
• Spray angle: 120° & 140°
• Finish - Brass or Nickel Chrome

Descriptions
• Size: 65, 80 or I 00 mm flanged end
(2.5", 3" or 4")
• Model JC Bronze construction
• Model JCS Stainless Steel construction
• Used to segregate the area by creating water curtain
• Flow I 000 to 3000 lpm (264 to
792 gpm) at 7 kg/cm.sq. ( I 00 psi)
• Produces flat water curtain projecting upwards

• Model GA
• Hydraulically operated mechanical bell used along with fire protection system valves
• Corrosion resistant Aluminium alloy material, epoxy coated all over
• Wall mounted (Type B) or direct online mounting type (Type A)
• Approvals: UL Listed and FM Approved

• Model RC9
• Retard Chamber is used with Alarm Valve Trim when variable pressure is anticipated in the system. It is a holding
tank to prevent sounding of Sprinkler Alarm during water pressure surge
• Material Stainless Steel
• Connection N 3/4" BSPT (F)

• Model FCA & FCA-S
• Size: 65NB, 80NB and I OONB
• Flow from I 00 to I 800 LPM (26 to 476 GPM)
• Carbon Steel or Stainless Steel material
• Working pressure 2.8 to 7 kg/cm.sq
(40 to I 00 psi)
• Epoxy painted from inside and outside
• Stainless Steel orifice plate fitted with foam chamber
• Frangible glass vapour seal
• Solid or split deflector

• Model RPA & RPA-S
• Size: 65 NB
• Rim Seal Pourer is designed to discharge foam gently as it expands and slides down inside
of the tank shell and directly in the rim seal area
• Carbon Steel or Stainless Steel
Construction
• Epoxy painted from inside and outside

• Model Fl & H
• Size: Yi" BSPT or NPT
• Air aspirating type
• Stainless Steel (FI) or Bronze (H) construction
• Working pressure 2 to 4 kg/cm.sq (30 to 60 psi)
• K - Factor 42
• Pendent mounting
• Under FM Approval